media: chips-media: wave5: Resume device before setting EOS flag
Linux
Affected versions
| Product | Affected | Fixed in |
|---|---|---|
| Linux Linux |
| No fix yet |
| Linux Linux |
|
Linux
| Product | Affected | Fixed in |
|---|---|---|
| Linux Linux |
| No fix yet |
| Linux Linux |
|
|
In the Linux kernel, the following vulnerability has been resolved:
media: chips-media: wave5: Resume device before setting EOS flag
Setting the EOS flag talks to the firmware via send_firmware_command(), which accesses VPU registers. Both the STREAMOFF path (wave5_vpu_dec_job_abort()) and the V4L2_DEC_CMD_STOP path (wave5_vpu_dec_stop()) can run while the device is runtime suspended, so those register accesses hit powered-down hardware and the SoC raises an asynchronous SError, panicking the kernel:
SError Interrupt on CPU3, code 0x00000000bf000000 -- SError send_firmware_command+0x2c/0x160 [wave5] wave5_vpu_dec_set_bitstream_flag+0x6c/0x80 [wave5] wave5_vpu_dec_update_bitstream_buffer+0x80/0xec [wave5] wave5_vpu_dec_job_abort+0x44/0xa0 [wave5] v4l2_m2m_cancel_job+0x110/0x19c [v4l2_mem2mem] v4l2_m2m_streamoff+0x24/0x140 [v4l2_mem2mem]
Resume the device with pm_runtime_resume_and_get() around the EOS firmware command and release it with pm_runtime_put_autosuspend(), matching the runtime PM handling already done in wave5_vpu_dec_device_run().
From the CVE record · Linux
The Linux kernel’s wave5 video decoder can access powered-down VPU registers when setting the end-of-stream flag. A local user exercising the decoder’s STREAMOFF or V4L2_DEC_CMD_STOP path while the device is runtime suspended can trigger a kernel panic.
Engineers running Linux kernels with the wave5 video decoder should check their deployments; affected versions were not specified.