{"schemaVersion":1,"url":"https://cve.openhack.com/cve/CVE-2026-87042","id":"CVE-2026-87042","title":"Zephyr denial of service in PTP Delay_Resp timer handling","description":"The IEEE 1588 (PTP) port implementation in subsys/net/lib/ptp/port.c adopted the logMessageInterval field of a received Delay_Resp message without any validation. port_delay_resp_msg_process() stored the raw wire value (a full-range int8_t) into port_ds.log_min_delay_req_interval, and that value is later used as a shift count by port_timer_set_timeout() when the Delay_Req timer is armed. Values be","descriptionLong":"The IEEE 1588 (PTP) port implementation in subsys/net/lib/ptp/port.c adopted the logMessageInterval field of a received Delay_Resp message without any validation. port_delay_resp_msg_process() stored the raw wire value (a full-range int8_t) into port_ds.log_min_delay_req_interval, and that value is later used as a shift count by port_timer_set_timeout() when the Delay_Req timer is armed. Values below about -30 truncate the computed timeout to zero, and values with a magnitude of 64 or more perform an undefined shift of a uint64_t; the standards-defined \"not applicable\" encoding 0x7F fell into the latter case as well.\n\nPTP messages are received over unauthenticated link-local traffic (UDP multicast on 224.0.1.129, IPv6 multicast, or raw IEEE 802.3), and the handler accepts a Delay_Resp from any sender as long as the port is a time receiver using the end-to-end delay mechanism and the message echoes the port identity and a pending sequence id — both of which the victim itself broadcasts in its Delay_Req. Any node on the same link can therefore inject a single crafted Delay_Resp, or simply become the time transmitter and advertise the bogus interval.\n\nOnce the delay timer is armed with a zero timeout, the cooperative PTP thread re-arms and retransmits a Delay_Req on every tick. Each transmission takes a buffer from the fixed CONFIG_PTP_MSG_POLL_SIZE message slab (default 10) and holds it on port->delay_req_list for three seconds, so the slab is emptied within milliseconds and ptp_msg_alloc() then blocks with K_FOREVER inside the only thread that frees those buffers — permanently stalling time synchronization until reboot. Where a transmit-timestamp callback on another thread keeps recycling buffers, the result is instead a sustained multicast Delay_Req flood and continuous CPU consumption. There is no memory corruption and no disclosure of data; the impact is availability of the PTP subsystem and of the local network segment.\n\nThe fix rejects intervals outside a representable range and treats 0x7F as \"not applicable\" as required by IEEE 1588-2019 Table 42. The equivalent unchecked adoption of logMessageInterval from Sync messages in port_sync_msg_process(), a weaker variant of the same issue, is fixed by the companion change 334bf57f416f (#118150), which applies the same range check, ignores the field for unicast Sync messages and treats 0x7F as not applicable.","published":"2026-11-10T22:07:40.237Z","updated":"2026-11-15T07:06:50.108287229Z","reserved":"2026-09-08T18:40:46.092Z","status":"Awaiting Analysis","rejected":false,"assigner":"zephyr","metric":{"version":"3.1","score":6.5,"vector":"CVSS:3.1/AV:A/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H","rating":"medium","source":"zephyr"},"metrics":[{"version":"3.1","score":6.5,"vector":"CVSS:3.1/AV:A/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H","rating":"medium","source":"zephyr"},{"version":"3.1","score":6.5,"vector":"CVSS:3.1/AV:A/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H","rating":"medium","source":"zephyrproject.org"},{"version":"3.1","score":6.5,"vector":"CVSS:3.1/AV:A/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H","rating":"medium","source":"OSV"}],"rating":"medium","products":["zephyrproject zephyr"],"affectedProducts":[{"vendor":"zephyrproject","product":"zephyr","defaultStatus":"unaffected","versions":[{"version":"3.7.0","status":"affected","versionType":"semver","lessThan":"4.3.2"},{"version":"4.4.0","status":"affected","versionType":"semver","lessThan":"4.5.0"}],"platforms":[]}],"packages":[],"cwes":["CWE-400"],"aliases":["GHSA-cx9q-8hq3-7hpr"],"references":[{"url":"https://github.com/zephyrproject-rtos/zephyr/commit/f6b9459f082ac8cc18b7d20a5c4ce1d86b7a55b5","tags":["patch","fix"]},{"url":"https://github.com/zephyrproject-rtos/zephyr/commit/334bf57f416f2f65745e68db98edf3615ec4e7ab","tags":["patch","fix"]},{"url":"https://github.com/zephyrproject-rtos/zephyr/security/advisories/GHSA-cx9q-8hq3-7hpr","tags":["advisory"]},{"url":"https://github.com/CVEProject/cvelistV5/tree/main/cves/2026/87xxx/CVE-2026-87042.json","tags":["advisory"]},{"url":"https://nvd.nist.gov/vuln/detail/CVE-2026-87042","tags":["advisory"]},{"url":"https://github.com/zephyrproject-rtos/zephyr","tags":["package"]}],"patchReferenced":true,"fixAvailable":true,"exploitReferenced":false,"kev":false,"kevAdded":null,"kevDue":null,"kevEntry":null,"ssvc":{"exploitation":"none","automatable":"no","technicalImpact":"partial"},"epss":0.00312,"epssPercentile":0.24593,"sources":[{"name":"CVE List","url":"https://www.cve.org/CVERecord?id=CVE-2026-87042","ok":true},{"name":"NVD","url":"https://nvd.nist.gov/vuln/detail/CVE-2026-87042","ok":true,"note":"Awaiting Analysis"},{"name":"OSV","url":"https://osv.dev/vulnerability/CVE-2026-87042","ok":true,"note":"0 packages"},{"name":"CISA KEV","url":"https://www.cisa.gov/known-exploited-vulnerabilities-catalog","ok":true,"note":"not listed"},{"name":"EPSS","url":"https://api.first.org/data/v1/epss?cve=CVE-2026-87042","ok":true,"note":"scored 2026-11-19"}],"aiTitle":true,"tech":[],"critical":[],"attention":null}