{"schemaVersion":1,"url":"https://cve.openhack.com/cve/CVE-2026-79982","id":"CVE-2026-79982","title":"Zephyr buffer overflow in Bluetooth HCI USB transport","description":"The Bluetooth HCI USB transport class of the new USB device stack, subsys/usb/device_next/class/bt_hci.c, copies every controller-to-host HCI packet into a USB transfer buffer before enqueuing it on an endpoint. bt_hci_tx_sync_in() allocated that buffer from bt_hci_ep_pool, a fixed pool whose slots are only USBD_MAX_BULK_MPS bytes (64 on full-speed-only builds), and then performed net_buf_add_mem(","descriptionLong":"The Bluetooth HCI USB transport class of the new USB device stack, subsys/usb/device_next/class/bt_hci.c, copies every controller-to-host HCI packet into a USB transfer buffer before enqueuing it on an endpoint. bt_hci_tx_sync_in() allocated that buffer from bt_hci_ep_pool, a fixed pool whose slots are only USBD_MAX_BULK_MPS bytes (64 on full-speed-only builds), and then performed net_buf_add_mem(buf, bt_buf->data, bt_buf->len) with no length check. HCI event and ACL buffers are sized by CONFIG_BT_BUF_EVT_RX_SIZE and CONFIG_BT_BUF_ACL_RX_SIZE and can be far larger, so the copy runs past the end of the 64-byte slot into the adjacent slots and into whatever follows the statically allocated pool.\n\nThe device runs the local Bluetooth controller in raw HCI mode (CONFIG_BT_HCI_RAW), so the oversized packets originate over the air. With the HCI buffer sizes recommended for full-featured controllers, an unauthenticated attacker within Bluetooth range can supply the overflowing bytes: a connected peer that negotiates Data Length Extension can send ACL fragments up to CONFIG_BT_CTLR_DATA_LENGTH_MAX bytes, and an attacker that merely broadcasts extended advertising data reaches the same path through LE Extended Advertising Report events, which the controller fragments only to CONFIG_BT_BUF_EVT_RX_SIZE. In the stock configuration the overflow is already reached without any radio traffic: the mandatory Read Supported Commands command-complete event is 70 bytes and overruns the 64-byte slot by six bytes on every host initialization.\n\nBecause net_buf_add_mem() validates tailroom only through an assertion unless CONFIG_NET_BUF_HARDENING is enabled, builds with CONFIG_ASSERT=n — the usual production setting — silently corrupt memory adjacent to the USB buffer pool with attacker-chosen contents, which on a target without memory protection between subsystems can lead to arbitrary code execution. Builds with assertions enabled fail the assertion instead and panic, giving a remotely triggerable denial of service. The fix introduces a separate bt_hci_tx_pool sized to MAX(BT_BUF_ACL_RX_SIZE, BT_BUF_EVT_RX_SIZE) for the controller-to-host direction while leaving the host-to-device pool at the endpoint packet size, which is already bounds-checked during reassembly.","published":"2026-10-23T19:56:19.432Z","updated":"2026-11-05T13:08:40.991829781Z","reserved":"2026-08-25T16:06:38.229Z","status":"Awaiting Analysis","rejected":false,"assigner":"zephyr","metric":{"version":"3.1","score":8.8,"vector":"CVSS:3.1/AV:A/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H","rating":"high","source":"zephyr"},"metrics":[{"version":"3.1","score":8.8,"vector":"CVSS:3.1/AV:A/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H","rating":"high","source":"zephyr"},{"version":"3.1","score":8.8,"vector":"CVSS:3.1/AV:A/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H","rating":"high","source":"zephyrproject.org"},{"version":"3.1","score":8.8,"vector":"CVSS:3.1/AV:A/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H","rating":"high","source":"OSV"}],"rating":"high","products":["zephyrproject zephyr"],"affectedProducts":[{"vendor":"zephyrproject","product":"zephyr","defaultStatus":"unaffected","versions":[{"version":"3.3.0","status":"affected","versionType":"semver","lessThan":"4.3.2"},{"version":"4.4.0","status":"affected","versionType":"semver","lessThan":"4.5.0"}],"platforms":[]}],"packages":[],"cwes":["CWE-787"],"aliases":["GHSA-w5px-w97v-c3hj"],"references":[{"url":"https://github.com/zephyrproject-rtos/zephyr/commit/0419defd2391652edc27689d206fcd9c48439d4a","tags":["patch","fix"]},{"url":"https://github.com/zephyrproject-rtos/zephyr/security/advisories/GHSA-w5px-w97v-c3hj","tags":["advisory"]},{"url":"https://github.com/CVEProject/cvelistV5/tree/main/cves/2026/79xxx/CVE-2026-79982.json","tags":["advisory"]},{"url":"https://nvd.nist.gov/vuln/detail/CVE-2026-79982","tags":["advisory"]},{"url":"https://github.com/zephyrproject-rtos/zephyr","tags":["package"]}],"patchReferenced":true,"fixAvailable":true,"exploitReferenced":false,"kev":false,"kevAdded":null,"kevDue":null,"kevEntry":null,"ssvc":{"exploitation":"none","automatable":"no","technicalImpact":"total"},"epss":0.00229,"epssPercentile":0,"sources":[{"name":"CVE List","url":"https://www.cve.org/CVERecord?id=CVE-2026-79982","ok":true},{"name":"NVD","url":"https://nvd.nist.gov/vuln/detail/CVE-2026-79982","ok":true,"note":"Awaiting Analysis"},{"name":"OSV","url":"https://osv.dev/vulnerability/CVE-2026-79982","ok":true,"note":"0 packages"},{"name":"CISA KEV","url":"https://www.cisa.gov/known-exploited-vulnerabilities-catalog","ok":true,"note":"not listed"},{"name":"EPSS","url":"https://api.first.org/data/v1/epss?cve=CVE-2026-79982","ok":true,"note":"scored "}],"aiTitle":true,"tech":[],"critical":[],"attention":null}