{"schemaVersion":1,"url":"https://cve.openhack.com/cve/CVE-2026-79976","id":"CVE-2026-79976","title":"Zephyr stale buffer access in MCTP-over-I2C target binding","description":"The MCTP-over-I2C+GPIO target binding in subsys/pmci/mctp/mctp_i2c_gpio_target.c emulates a small pseudo-register file, where the bus controller first writes a register number and then writes or reads payload bytes. The selected register (b->reg_addr) and the data-phase flag (b->rxtx) were never cleared when the controller issued an I2C STOP, so after a completed transfer the target still had a da","descriptionLong":"The MCTP-over-I2C+GPIO target binding in subsys/pmci/mctp/mctp_i2c_gpio_target.c emulates a small pseudo-register file, where the bus controller first writes a register number and then writes or reads payload bytes. The selected register (b->reg_addr) and the data-phase flag (b->rxtx) were never cleared when the controller issued an I2C STOP, so after a completed transfer the target still had a data register selected while the packet buffer that register refers to had already been consumed and set to NULL by mctp_i2c_gpio_target_stop().\n\nA controller on the bus can re-enter the same branch of mctp_i2c_gpio_target_stop() with a NULL buffer using two ordinary transactions and no authentication: first a normal packet write to MCTP_I2C_GPIO_RX_MSG_ADDR followed by STOP (which delivers and frees b->rx_pkt), then a bare read transaction followed by STOP. The failing read_requested() call leaves the stale state untouched and the I2C driver still delivers the STOP callback, which then calls mctp_bus_rx() with a NULL packet. The symmetric case exists on the transmit side, where the stale MCTP_I2C_GPIO_TX_MSG_ADDR selection dereferences b->tx_pkt->end after b->tx_pkt has been cleared and additionally signals b->tx_complete a second time, causing the next outbound packet to be dropped.\n\nThe dereference happens in the I2C target interrupt handler, so on any target that traps accesses to address 0 the result is a fatal exception and a device reset or halt — a denial of service inflicted by any device able to act as controller on the shared management bus (for example compromised firmware on a peer MCTP endpoint or on the BMC). On parts where address 0 is readable, the impact degrades to a malformed packet buffer being handed to the MCTP stack and lost transmit packets. No attacker-controlled value is written and no confidentiality or integrity boundary is crossed.\n\nThe fix resets b->reg_addr to MCTP_I2C_GPIO_INVALID_ADDR and clears b->rxtx at every STOP, so a new register must be selected before any data phase can run again. Only builds that opt into the experimental CONFIG_MCTP subsystem with CONFIG_MCTP_I2C_GPIO_TARGET=y are affected.","published":"2026-10-21T18:19:34.519Z","updated":"2026-11-05T13:08:39.810760581Z","reserved":"2026-08-25T16:06:27.086Z","status":"Awaiting Analysis","rejected":false,"assigner":"zephyr","metric":{"version":"3.1","score":7.1,"vector":"CVSS:3.1/AV:A/AC:L/PR:N/UI:N/S:U/C:L/I:N/A:H","rating":"high","source":"zephyr"},"metrics":[{"version":"3.1","score":7.1,"vector":"CVSS:3.1/AV:A/AC:L/PR:N/UI:N/S:U/C:L/I:N/A:H","rating":"high","source":"zephyr"},{"version":"3.1","score":7.1,"vector":"CVSS:3.1/AV:A/AC:L/PR:N/UI:N/S:U/C:L/I:N/A:H","rating":"high","source":"zephyrproject.org"},{"version":"3.1","score":7.1,"vector":"CVSS:3.1/AV:A/AC:L/PR:N/UI:N/S:U/C:L/I:N/A:H","rating":"high","source":"OSV"}],"rating":"high","products":["zephyrproject zephyr"],"affectedProducts":[{"vendor":"zephyrproject","product":"zephyr","defaultStatus":"unaffected","versions":[{"version":"4.3.0","status":"affected","versionType":"semver","lessThan":"4.3.2"},{"version":"4.4.0","status":"affected","versionType":"semver","lessThan":"4.5.0"}],"platforms":[]}],"packages":[],"cwes":["CWE-476"],"aliases":["GHSA-76fx-m4mf-24gq"],"references":[{"url":"https://github.com/zephyrproject-rtos/zephyr/commit/60f7fee438504de29f2473d7a8d0535235b983ef","tags":["patch","fix"]},{"url":"https://github.com/zephyrproject-rtos/zephyr/commit/a097178023785f3bc0a925ac489e490521ca84ea","tags":["patch","fix"]},{"url":"https://github.com/zephyrproject-rtos/zephyr/security/advisories/GHSA-76fx-m4mf-24gq","tags":["advisory"]},{"url":"https://github.com/CVEProject/cvelistV5/tree/main/cves/2026/79xxx/CVE-2026-79976.json","tags":["advisory"]},{"url":"https://nvd.nist.gov/vuln/detail/CVE-2026-79976","tags":["advisory"]},{"url":"https://github.com/zephyrproject-rtos/zephyr","tags":["package"]}],"patchReferenced":true,"fixAvailable":true,"exploitReferenced":false,"kev":false,"kevAdded":null,"kevDue":null,"kevEntry":null,"ssvc":{"exploitation":"none","automatable":"no","technicalImpact":"partial"},"epss":0.0029,"epssPercentile":0.21929,"sources":[{"name":"CVE List","url":"https://www.cve.org/CVERecord?id=CVE-2026-79976","ok":true},{"name":"NVD","url":"https://nvd.nist.gov/vuln/detail/CVE-2026-79976","ok":true,"note":"Awaiting Analysis"},{"name":"OSV","url":"https://osv.dev/vulnerability/CVE-2026-79976","ok":true,"note":"0 packages"},{"name":"CISA KEV","url":"https://www.cisa.gov/known-exploited-vulnerabilities-catalog","ok":true,"note":"not listed"},{"name":"EPSS","url":"https://api.first.org/data/v1/epss?cve=CVE-2026-79976","ok":true,"note":"scored 2026-11-19"}],"aiTitle":true,"tech":[],"critical":[],"attention":null}