net/mlx5: Fix switchdev mode rollback in case of failure
Linux
Affected versions
| Product | Affected | Fixed in |
|---|---|---|
| Linux Linux |
| No fix yet |
| Linux Linux |
Linux
| Product | Affected | Fixed in |
|---|---|---|
| Linux Linux |
| No fix yet |
| Linux Linux |
|
|
In the Linux kernel, the following vulnerability has been resolved:
net/mlx5: Fix switchdev mode rollback in case of failure
If for some internal reason switchdev mode fails, we rollback to legacy mode, before this patch, rollback will unregister the uplink netdev and leave it unregistered causing the below kernel bug.
To fix this, we need to avoid netdev unregister by setting the proper rollback flag 'MLX5_PRIV_FLAGS_SWITCH_LEGACY' to indicate legacy mode.
devlink (431) used greatest stack depth: 11048 bytes left mlx5_core 0000:00:03.0: E-Switch: Disable: mode(LEGACY), nvfs(0), \ necvfs(0), active vports(0) mlx5_core 0000:00:03.0: E-Switch: Supported tc chains and prios offload mlx5_core 0000:00:03.0: Loading uplink representor for vport 65535 mlx5_core 0000:00:03.0: mlx5_cmd_out_err:816:(pid 456): \ QUERY_HCA_CAP(0x100) op_mod(0x0) failed, \ status bad parameter(0x3), syndrome (0x3a3846), err(-22) mlx5_core 0000:00:03.0 enp0s3np0 (unregistered): Unloading uplink \ representor for vport 65535 ------------[ cut here ]------------ kernel BUG at net/core/dev.c:12070! Oops: invalid opcode: 0000 [#1] SMP NOPTI CPU: 2 UID: 0 PID: 456 Comm: devlink Not tainted 6.16.0-rc3+ \ #9 PREEMPT(voluntary) RIP: 0010:unregister_netdevice_many_notify+0x123/0xae0 ... Call Trace: [ 90.923094] unregister_netdevice_queue+0xad/0xf0 [ 90.923323] unregister_netdev+0x1c/0x40 [ 90.923522] mlx5e_vport_rep_unload+0x61/0xc6 [ 90.923736] esw_offloads_enable+0x8e6/0x920 [ 90.923947] mlx5_eswitch_enable_locked+0x349/0x430 [ 90.924182] ? is_mp_supported+0x57/0xb0 [ 90.924376] mlx5_devlink_eswitch_mode_set+0x167/0x350 [ 90.924628] devlink_nl_eswitch_set_doit+0x6f/0xf0 [ 90.924862] genl_family_rcv_msg_doit+0xe8/0x140 [ 90.925088] genl_rcv_msg+0x18b/0x290 [ 90.925269] ? __pfx_devlink_nl_pre_doit+0x10/0x10 [ 90.925506] ? __pfx_devlink_nl_eswitch_set_doit+0x10/0x10 [ 90.925766] ? __pfx_devlink_nl_post_doit+0x10/0x10 [ 90.926001] ? __pfx_genl_rcv_msg+0x10/0x10 [ 90.926206] netlink_rcv_skb+0x52/0x100 [ 90.926393] genl_rcv+0x28/0x40 [ 90.926557] netlink_unicast+0x27d/0x3d0 [ 90.926749] netlink_sendmsg+0x1f7/0x430 [ 90.926942] __sys_sendto+0x213/0x220 [ 90.927127] ? __sys_recvmsg+0x6a/0xd0 [ 90.927312] __x64_sys_sendto+0x24/0x30 [ 90.927504] do_syscall_64+0x50/0x1c0 [ 90.927687] entry_SYSCALL_64_after_hwframe+0x76/0x7e [ 90.927929] RIP: 0033:0x7f7d0363e047
From the CVE record · Linux
The Linux kernel’s net/mlx5 driver can incorrectly unregister the uplink network device when a switch to switchdev mode fails and rolls back to legacy mode, causing a kernel bug. The reported failure occurs during a local devlink mode change; the input does not establish whether an attacker can trigger it or what privileges are required.
Engineers running Linux kernels with the net/mlx5 driver should check their kernel’s fix status; affected versions are not specified.