{"schemaVersion":1,"url":"https://cve.openhack.com/cve/CVE-2026-19576","id":"CVE-2026-19576","title":"Stack out-of-bounds write in the Goodix GT911 touch controller driver from an unvalidated device-reported touch point count","description":"The Goodix GT9xx input driver in drivers/input/input_gt911.c reads the touch point count from the controller's status register and masks it with GT911_TOUCH_POINTS_MSK (0x0F), yielding a value of 0..15. In gt911_process() that value is used directly as the loop bound for filling point_reg[], a stack array sized to CONFIG_INPUT_GT911_MAX_TOUCH_POINTS, whose Kconfig range is 1..5 with a default of 1","descriptionLong":"The Goodix GT9xx input driver in drivers/input/input_gt911.c reads the touch point count from the controller's status register and masks it with GT911_TOUCH_POINTS_MSK (0x0F), yielding a value of 0..15. In gt911_process() that value is used directly as the loop bound for filling point_reg[], a stack array sized to CONFIG_INPUT_GT911_MAX_TOUCH_POINTS, whose Kconfig range is 1..5 with a default of 1. No other check constrains the count; the driver relied only on a comment asserting that the controller had been programmed at init to report no more points than configured.\n\nEach loop iteration issues an I2C read of eight bytes straight into point_reg[i], so a controller that reports more points than the array holds causes up to 112 bytes of peer-supplied data to be written past the end of the array, over the stack frame of gt911_process() in the system workqueue thread. Two further loops then read out of bounds from the same array. Triggering it requires control of, or the ability to substitute, the I2C touch controller — plausible on the many supported boards where the GT9xx panel is a pluggable display module or shield rather than an on-PCB part; a spoofed device need only answer the init probes with a supported product ID and a checksum-valid config blob. The same overflow can also occur non-adversarially, with a GT9271-class panel that ignores the driver's touch-count programming and reports up to ten points, or with bus corruption of the single status byte.\n\nThe impact is an out-of-bounds stack write with fully attacker-chosen content executing at kernel privilege, i.e. potential control-flow hijack on the host MCU, in addition to out-of-bounds reads and crashes. The attack vector is physical/local hardware access only; there is no network, USB, or syscall path to the defect. The fix clamps the reported count with min() against CONFIG_INPUT_GT911_MAX_TOUCH_POINTS before any array indexing.","published":"2026-10-11T17:14:53.339Z","updated":"2026-11-13T19:08:50.352849821Z","reserved":"2026-08-11T19:56:48.396Z","status":"Awaiting Analysis","rejected":false,"assigner":"zephyr","metric":{"version":"3.1","score":6.8,"vector":"CVSS:3.1/AV:P/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H","rating":"medium","source":"zephyr"},"metrics":[{"version":"3.1","score":6.8,"vector":"CVSS:3.1/AV:P/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H","rating":"medium","source":"zephyr"},{"version":"3.1","score":6.8,"vector":"CVSS:3.1/AV:P/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H","rating":"medium","source":"zephyrproject.org"},{"version":"3.1","score":6.8,"vector":"CVSS:3.1/AV:P/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H","rating":"medium","source":"OSV"}],"rating":"medium","products":["zephyrproject zephyr"],"affectedProducts":[{"vendor":"zephyrproject","product":"zephyr","defaultStatus":"unaffected","versions":[{"version":"4.0.0","status":"affected","versionType":"semver","lessThan":"4.5.0"}],"platforms":[]}],"packages":[],"cwes":["CWE-787"],"aliases":["GHSA-p7qh-fvwx-f7vr"],"references":[{"url":"https://github.com/zephyrproject-rtos/zephyr/commit/42b52d571eb2113012c135276693042fd372fdea","tags":["patch","fix"]},{"url":"https://github.com/zephyrproject-rtos/zephyr/security/advisories/GHSA-p7qh-fvwx-f7vr","tags":["advisory"]},{"url":"https://github.com/CVEProject/cvelistV5/tree/main/cves/2026/19xxx/CVE-2026-19576.json","tags":["advisory"]},{"url":"https://nvd.nist.gov/vuln/detail/CVE-2026-19576","tags":["advisory"]},{"url":"https://github.com/zephyrproject-rtos/zephyr","tags":["package"]}],"patchReferenced":true,"fixAvailable":true,"exploitReferenced":false,"kev":false,"kevAdded":null,"kevDue":null,"kevEntry":null,"ssvc":{"exploitation":"none","automatable":"no","technicalImpact":"total"},"epss":0.00169,"epssPercentile":0.06423,"sources":[{"name":"CVE List","url":"https://www.cve.org/CVERecord?id=CVE-2026-19576","ok":true},{"name":"NVD","url":"https://nvd.nist.gov/vuln/detail/CVE-2026-19576","ok":true,"note":"Awaiting Analysis"},{"name":"OSV","url":"https://osv.dev/vulnerability/CVE-2026-19576","ok":true,"note":"0 packages"},{"name":"CISA KEV","url":"https://www.cisa.gov/known-exploited-vulnerabilities-catalog","ok":true,"note":"not listed"},{"name":"EPSS","url":"https://api.first.org/data/v1/epss?cve=CVE-2026-19576","ok":true,"note":"scored 2026-11-19"}],"aiTitle":false,"tech":[],"critical":[],"attention":null}