{"schemaVersion":1,"url":"https://cve.openhack.com/cve/CVE-2026-19184","id":"CVE-2026-19184","title":"Out-of-bounds write in the NXP GAU ADC driver due to byte-versus-sample buffer size validation mismatch","description":"The NXP GAU ADC driver (drivers/adc/adc_mcux_gau_adc.c) validated the caller-supplied sequence->buffer_size, which is expressed in bytes, against the number of active channels, which is a sample count. It then stored that byte count directly in data->results_length and used it in mcux_gau_adc_read_samples() as the number of uint16_t slots available. Because each conversion result occupies sizeof(u","descriptionLong":"The NXP GAU ADC driver (drivers/adc/adc_mcux_gau_adc.c) validated the caller-supplied sequence->buffer_size, which is expressed in bytes, against the number of active channels, which is a sample count. It then stored that byte count directly in data->results_length and used it in mcux_gau_adc_read_samples() as the number of uint16_t slots available. Because each conversion result occupies sizeof(uint16_t) bytes, a buffer that was accepted as \"large enough\" could be written with up to twice its size in bytes, so every sample past the buffer's midpoint was written out of bounds.\n\nadc_read() and adc_read_async() are Zephyr system calls. The syscall verifier in drivers/adc/adc_handlers.c only confirms that the caller owns buffer_size writable bytes (K_SYSCALL_MEMORY_WRITE); deciding whether that size is sufficient for the requested channels and extra_samplings is delegated entirely to the driver. On a build with CONFIG_USERSPACE=y, a user-mode thread that has been granted the ADC device object could therefore submit a deliberately half-sized buffer and cause the driver's work-queue handler — which runs in supervisor mode, outside the caller's MPU restrictions — to write ADC conversion results past the end of that buffer, at an address and for a length of the caller's choosing.\n\nThe overrun is bounded by the requested sequence: with sequence->options->extra_samplings set, the sampling loop walks the buffer pointer forward across every sampling, so the total overrun can reach the full size of the supplied buffer (kilobytes for a large extra_samplings). The written words are 16-bit ADC conversion results, so the content is only partially attacker-influenced (via the selected analog input, gain and resolution), but the destination and length are fully controlled — sufficient for kernel memory corruption, a crash, or a userspace-to-kernel privilege escalation. Builds without CONFIG_USERSPACE, or on SoCs other than NXP RW61x with the GAU ADC node enabled, are not exposed to the privilege boundary; there the same defect only causes a silent overflow when the application itself passes an undersized buffer.\n\nThe fix replaces the ad-hoc check with the shared adc_sequence_validate_buffer() helper (validating against num_channels * sizeof(uint16_t)), stores buffer_size / sizeof(uint16_t) in results_length, and corrects the loop bound to a post-decrement so exactly the available number of slots may be written.","published":"2026-10-05T08:06:22.681Z","updated":"2026-11-11T13:20:26.391322790Z","reserved":"2026-08-06T18:36:10.589Z","status":"Awaiting Analysis","rejected":false,"assigner":"zephyr","metric":{"version":"3.1","score":8.4,"vector":"CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:C/C:N/I:H/A:H","rating":"high","source":"zephyr"},"metrics":[{"version":"3.1","score":8.4,"vector":"CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:C/C:N/I:H/A:H","rating":"high","source":"zephyr"},{"version":"3.1","score":8.4,"vector":"CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:C/C:N/I:H/A:H","rating":"high","source":"zephyrproject.org"},{"version":"3.1","score":8.4,"vector":"CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:C/C:N/I:H/A:H","rating":"high","source":"OSV"}],"rating":"high","products":["zephyrproject zephyr"],"affectedProducts":[{"vendor":"zephyrproject","product":"zephyr","defaultStatus":"unaffected","versions":[{"version":"3.7.0","status":"affected","versionType":"semver","lessThan":"4.3.2"},{"version":"4.4.0","status":"affected","versionType":"semver","lessThan":"4.5.0"}],"platforms":[]}],"packages":[],"cwes":["CWE-787"],"aliases":["GHSA-j86w-mfgw-fxj9"],"references":[{"url":"https://github.com/zephyrproject-rtos/zephyr/commit/82b11958065aa85f8644ddc318ff4a328d1443c8","tags":["patch","fix"]},{"url":"https://github.com/zephyrproject-rtos/zephyr/security/advisories/GHSA-j86w-mfgw-fxj9","tags":["advisory"]},{"url":"https://github.com/CVEProject/cvelistV5/tree/main/cves/2026/19xxx/CVE-2026-19184.json","tags":["advisory"]},{"url":"https://nvd.nist.gov/vuln/detail/CVE-2026-19184","tags":["advisory"]},{"url":"https://github.com/zephyrproject-rtos/zephyr","tags":["package"]}],"patchReferenced":true,"fixAvailable":true,"exploitReferenced":false,"kev":false,"kevAdded":null,"kevDue":null,"kevEntry":null,"ssvc":{"exploitation":"none","automatable":"no","technicalImpact":"partial"},"epss":0.00103,"epssPercentile":0.00993,"sources":[{"name":"CVE List","url":"https://www.cve.org/CVERecord?id=CVE-2026-19184","ok":true},{"name":"NVD","url":"https://nvd.nist.gov/vuln/detail/CVE-2026-19184","ok":true,"note":"Awaiting Analysis"},{"name":"OSV","url":"https://osv.dev/vulnerability/CVE-2026-19184","ok":true,"note":"0 packages"},{"name":"CISA KEV","url":"https://www.cisa.gov/known-exploited-vulnerabilities-catalog","ok":true,"note":"not listed"},{"name":"EPSS","url":"https://api.first.org/data/v1/epss?cve=CVE-2026-19184","ok":true,"note":"scored 2026-11-19"}],"aiTitle":false,"tech":[],"critical":[],"attention":null}