Skip to contentAffected versions
| Product | Affected | Fixed in |
|---|
| Juniper Networks Junos OS PTX1000, PTX3000, PTX5000 with FPC3, PTX10002-60C, PTX10008/16 with LC110x | < 20.4R3-S8≥ 21.1 · < 21.1R3-S4≥ 21.2 · < 21.2R3-S6≥ 21.3 · < 21.3R3-S3≥ 21.4 · < 21.4R3-S5≥ 22.1 · < 22.1R2-S2, 22.1R3
| No fix yet |
An Improper Neutralization of Equivalent Special Elements vulnerability in the Packet Forwarding Engine (PFE) of Juniper Networks Junos OS on PTX Series allows a unauthenticated, adjacent attacker to cause a Denial of Service (DoS).
When MPLS packets are meant to be sent to a flexible tunnel interface (FTI) and if the FTI tunnel is down, these will hit the reject NH, due to which the packets get sent to the CPU and cause a host path wedge condition. This will cause the FPC to hang and requires a manual restart to recover.
Please note that this issue specifically affects PTX1000, PTX3000, PTX5000 with FPC3, PTX10002-60C, and PTX10008/16 with LC110x. Other PTX Series devices and Line Cards (LC) are not affected.
The following log message can be seen when the issue occurs:
Cmerror Op Set: Host Loopback: HOST LOOPBACK WEDGE DETECTED IN PATH ID <id> (URI: /fpc/<fpc>/pfe/<pfe>/cm/<cm>/Host_Loopback/<cm>/HOST_LOOPBACK_MAKE_CMERROR_ID[<id>])
This issue affects Juniper Networks Junos OS:
* All versions earlier than 20.4R3-S8;
* 21.1 versions earlier than 21.1R3-S4;
* 21.2 versions earlier than 21.2R3-S6;
* 21.3 versions earlier than 21.3R3-S3;
* 21.4 versions earlier than 21.4R3-S5;
* 22.1 versions earlier than 22.1R2-S2, 22.1R3;
* 22.2 versions earlier than 22.2R2-S1, 22.2R3.
From the CVE record · juniper
Summary
AIThe Packet Forwarding Engine in Junos OS on certain PTX Series devices is vulnerable when MPLS packets are sent to a flexible tunnel interface that is down. An unauthenticated, adjacent attacker can cause an FPC to hang, requiring a manual restart.
Who should check
Operators of PTX1000, PTX3000, PTX5000 with FPC3, PTX10002-60C, or PTX10008/16 with LC110x should check Junos OS versions earlier than 20.4R3-S8; 21.1R3-S4 on 21.1; 21.2R3-S6 on 21.2; 21.3R3-S3 on 21.3; 21.4R3-S5 on 21.4; 22.1R2-S2 or 22.1R3 on 22.1; and 22.2R2-S1 or 22.2R3 on 22.2.
What to do
- 1Upgrade to the applicable fixed version: 20.4R3-S8, 21.1R3-S4, 21.2R3-S6, 21.3R3-S3, 21.4R3-S5, 22.1R2-S2 or 22.1R3, or 22.2R2-S1 or 22.2R3.
- 2Manually restart an affected FPC if it hangs.