serial: sc16is7xx: convert from _raw_ to _noinc_ regmap functions for FIFO
Linux
Affected versions
| Product | Affected | Fixed in |
|---|---|---|
| Linux Linux |
|
Linux
| Product | Affected | Fixed in |
|---|---|---|
| Linux Linux |
|
≥ dfeae619d781dee61666d5551b93ba3be755a86b · < dbf4ab821804df071c8b566d9813083125e6d97b| No fix yet |
| Linux Linux |
|
|
In the Linux kernel, the following vulnerability has been resolved:
serial: sc16is7xx: convert from _raw_ to _noinc_ regmap functions for FIFO
The SC16IS7XX IC supports a burst mode to access the FIFOs where the initial register address is sent ($00), followed by all the FIFO data without having to resend the register address each time. In this mode, the IC doesn't increment the register address for each R/W byte.
The regmap_raw_read() and regmap_raw_write() are functions which can perform IO over multiple registers. They are currently used to read/write from/to the FIFO, and although they operate correctly in this burst mode on the SPI bus, they would corrupt the regmap cache if it was not disabled manually. The reason is that when the R/W size is more than 1 byte, these functions assume that the register address is incremented and handle the cache accordingly.
Convert FIFO R/W functions to use the regmap _noinc_ versions in order to remove the manual cache control which was a workaround when using the _raw_ versions. FIFO registers are properly declared as volatile so cache will not be used/updated for FIFO accesses.
From the CVE record · Linux
The Linux kernel’s sc16is7xx serial driver uses regmap functions for FIFO transfers that can incorrectly update the regmap cache during multi-byte burst-mode access. The input does not establish whether an attacker can trigger this behavior or specify access, authentication, or user-interaction requirements.
Engineers running Linux kernels with the sc16is7xx serial driver should check their deployments; affected versions are not specified.