An Improper Input Validation vulnerability in the VxLAN packet forwarding engine (PFE) of Juniper Networks Junos OS on QFX5000 Series, EX4600 Series devices allows an unauthenticated, adjacent attacker, sending two or more genuine packets in the same VxLAN topology to possibly cause a DMA memory leak to occur under various specific operational conditions. The scenario described here is the worst-case scenario. There are other scenarios that require operator action to occur.
An indicator of compromise may be seen when multiple devices indicate that FPC0 has gone missing when issuing a show chassis fpc command for about 10 to 20 minutes, and a number of interfaces have also gone missing.
* 18.4 version 18.4R2 and later versions prior to 20.4R3-S8;
* 21.1 version 21.1R1 and later versions prior to 21.2R3-S6;
* 21.3 versions prior to 21.3R3-S5;
* 21.4 versions prior to 21.4R3-S4;
* 22.1 versions prior to 22.1R3-S3;
* 22.2 versions prior to 22.2R3-S1;
* 22.3 versions prior to 22.3R2-S2, 22.3R3;
* 22.4 versions prior to 22.4R2.
Summary
AIThe VxLAN packet forwarding engine on affected QFX5000 Series and EX4600 Series devices improperly validates input. Under specific operational conditions, an unauthenticated, adjacent attacker can send two or more genuine packets in the same VxLAN topology and possibly cause a DMA memory leak; other scenarios require operator action.
Who should check
Operators of QFX5000 Series or EX4600 Series devices running Junos OS should check affected releases from 18.4R2 through releases before the applicable fixed version in the 20.4, 21.1/21.2, 21.3, 21.4, 22.1, 22.2, 22.3, or 22.4 lines.
What to do
- 1Upgrade to the applicable fixed release: 20.4R3-S8, 21.2R3-S6, 21.3R3-S5, 21.4R3-S4, 22.1R3-S3, 22.2R3-S1, 22.3R2-S2 or 22.3R3, or 22.4R2.
- 2Run `show chassis fpc detail` to check whether FPC0 has gone missing.