USB: gadget: Fix use-after-free during usb config switch
Linux
Affected versions
| Product | Affected | Fixed in |
|---|---|---|
| Linux Linux |
| No fix yet |
| Linux Linux |
|
|
Linux
| Product | Affected | Fixed in |
|---|---|---|
| Linux Linux |
| No fix yet |
| Linux Linux |
|
|
6.0.166.1.26.2In the Linux kernel, the following vulnerability has been resolved:
USB: gadget: Fix use-after-free during usb config switch
In the process of switching USB config from rndis to other config, if the hardware does not support the ->pullup callback, or the hardware encounters a low probability fault, both of them may cause the ->pullup callback to fail, which will then cause a system panic (use after free).
The gadget drivers sometimes need to be unloaded regardless of the hardware's behavior.
Analysis as follows: ======================================================================= (1) write /config/usb_gadget/g1/UDC "none"
gether_disconnect+0x2c/0x1f8 rndis_disable+0x4c/0x74 composite_disconnect+0x74/0xb0 configfs_composite_disconnect+0x60/0x7c usb_gadget_disconnect+0x70/0x124 usb_gadget_unregister_driver+0xc8/0x1d8 gadget_dev_desc_UDC_store+0xec/0x1e4
(2) rm /config/usb_gadget/g1/configs/b.1/f1
rndis_deregister+0x28/0x54 rndis_free+0x44/0x7c usb_put_function+0x14/0x1c config_usb_cfg_unlink+0xc4/0xe0 configfs_unlink+0x124/0x1c8 vfs_unlink+0x114/0x1dc
From the CVE record · Linux
The Linux kernel USB gadget code has a use-after-free when switching away from an RNDIS configuration. A local user able to change the gadget configuration may trigger a system panic if the hardware lacks the pullup callback or that callback fails.
Engineers running Linux systems that use USB gadget RNDIS configurations should check their kernels; affected versions were not provided.