net: phy: at803x: fix NULL pointer dereference on AR9331 PHY
Linux
Affected versions
| Product | Affected | Fixed in |
|---|---|---|
| Linux Linux |
| No fix yet |
| Linux Linux |
|
|
Linux
| Product | Affected | Fixed in |
|---|---|---|
| Linux Linux |
| No fix yet |
| Linux Linux |
|
|
In the Linux kernel, the following vulnerability has been resolved:
net: phy: at803x: fix NULL pointer dereference on AR9331 PHY
Latest kernel will explode on the PHY interrupt config, since it depends now on allocated priv. So, run probe to allocate priv to fix it.
ar9331_switch ethernet.1:10 lan0 (uninitialized): PHY [!ahb!ethernet@1a000000!mdio!switch@10:00] driver [Qualcomm Atheros AR9331 built-in PHY] (irq=13) CPU 0 Unable to handle kernel paging request at virtual address 0000000a, epc == 8050e8a8, ra == 80504b34 ... Call Trace: [<8050e8a8>] at803x_config_intr+0x5c/0xd0 [<80504b34>] phy_request_interrupt+0xa8/0xd0 [<8050289c>] phylink_bringup_phy+0x2d8/0x3ac [<80502b68>] phylink_fwnode_phy_connect+0x118/0x130 [<8074d8ec>] dsa_slave_create+0x270/0x420 [<80743b04>] dsa_port_setup+0x12c/0x148 [<8074580c>] dsa_register_switch+0xaf0/0xcc0 [<80511344>] ar9331_sw_probe+0x370/0x388 [<8050cb78>] mdio_probe+0x44/0x70 [<804df300>] really_probe+0x200/0x424 [<804df7b4>] __driver_probe_device+0x290/0x298 [<804df810>] driver_probe_device+0x54/0xe4 [<804dfd50>] __device_attach_driver+0xe4/0x130 [<804dcb00>] bus_for_each_drv+0xb4/0xd8 [<804dfac4>] __device_attach+0x104/0x1a4 [<804ddd24>] bus_probe_device+0x48/0xc4 [<804deb44>] deferred_probe_work_func+0xf0/0x10c [<800a0ffc>] process_one_work+0x314/0x4d4 [<800a17fc>] worker_thread+0x2a4/0x354 [<800a9a54>] kthread+0x134/0x13c [<8006306c>] ret_from_kernel_thread+0x14/0x1c
Same Issue would affect some other PHYs (QCA8081, QCA9561), so fix it too.
From the CVE record · Linux
The Linux kernel’s at803x PHY driver can dereference a NULL pointer when configuring interrupts for an AR9331 PHY because required private data has not been allocated. The same issue may affect QCA8081 and QCA9561 PHYs. The input describes a crash during device setup, but does not establish an attacker-controlled trigger or access conditions.
Engineers running Linux kernels with AR9331, QCA8081, or QCA9561 PHYs should check their kernels; affected versions are not specified.