Junos OS: EX Series: RPD crash when executing specific "show ospf interface" commands from the CLI with OSPF authentication configured
Juniper Networks Junos OS
Affected versions
| Product | Affected | Fixed in |
|---|---|---|
| Juniper Networks Junos OS |
| No fix yet |
Juniper Networks Junos OS
| Product | Affected | Fixed in |
|---|---|---|
| Juniper Networks Junos OS |
| No fix yet |
Execution of the "show ospf interface extensive" or "show ospf interface detail" CLI commands on a Juniper Networks device running Junos OS may cause the routing protocols process (RPD) to crash and restart if OSPF interface authentication is configured, leading to a Denial of Service (DoS). By continuously executing the same CLI commands, a local attacker can repeatedly crash the RPD process causing a sustained Denial of Service. Note: Only systems utilizing ARM processors, found on the EX2300 and EX3400, are vulnerable to this issue. Systems shipped with other processor architectures are not vulnerable to this issue. The processor architecture can be displayed via the 'uname -a' command. For example: ARM (vulnerable): % uname -a | awk '{print $NF}' arm PowerPC (not vulnerable): % uname -a | awk '{print $NF}' powerpc AMD (not vulnerable): % uname -a | awk '{print $NF}' amd64 Intel (not vulnerable): % uname -a | awk '{print $NF}' i386 This issue affects Juniper Networks Junos OS: 12.3X48 versions prior to 12.3X48-D100; 14.1X53 versions prior to 14.1X53-D140, 14.1X53-D54; 15.1 versions prior to 15.1R7-S7; 15.1X49 versions prior to 15.1X49-D210; 15.1X53 versions prior to 15.1X53-D593; 16.1 versions prior to 16.1R7-S8; 17.1 versions prior to 17.1R2-S12; 17.2 versions prior to 17.2R3-S4; 17.3 versions prior to 17.3R3-S8; 17.4 versions prior to 17.4R2-S2, 17.4R3; 18.1 versions prior to 18.1R3-S2; 18.2 versions prior to 18.2R2, 18.2R3; 18.2X75 versions prior to 18.2X75-D40; 18.3 versions prior to 18.3R1-S2, 18.3R2.
From the CVE record · juniper
On ARM-based EX2300 and EX3400 devices running affected Junos OS versions, executing certain OSPF interface CLI commands can crash and restart the routing protocols process when OSPF interface authentication is configured. A local attacker able to execute those commands can repeat them to sustain a denial of service.
Operators of ARM-based EX2300 and EX3400 devices running Junos OS in the affected 12.3X48, 14.1X53, 15.1, 15.1X49, 15.1X53, 16.1, 17.1, 17.2, 17.3, 17.4, 18.1, 18.2, 18.2X75 or 18.3 release lines should check their versions.